在宏觀層面上，通過研究商業周期波動，可以更好地理解全球企業管理的復雜性。然而，隨著微觀經濟力量的存在，復雜性進一步增強，我們將利用Michael Porter的五力模型來研究。 

商業周期波動是跨國公司利潤的主要驅動力。因此，準確地了解商業周期波動的長度和深度，是成功規劃企業投資和制定適當戰略的一個重要因素。在過去的五十年中，大多數國家的經濟衰退的頻率和深度都有所下降，這就是所謂的“大緩和”。然而，從2007年底開始的大蕭條結束了這一格局。理解大緩和的原因是至關重要的，因?yàn)樗兄诹私夂暧^(guān)經濟環境的未來格局。 

經濟衰退的兩個重要方面是信貸緊縮和失業增加。然而，這些情況在各國之間有很大差異。而在德國和丹麥的失業率增加不多，西班牙已從過去的8%提高到20%。 

 

At a macro level, the complexity of global corporate management can be better understood by studying the Business Cycle Fluctuations. However, the complexity is further intensified with the existence of micro economic forces, which we will be studying using Michael Porter's Five Forces model.

 

MACRO-ECONOMIC FORCES 宏觀經濟的力量

 

Business cycle fluctuations are a key driver of multinationals’ profits. An accurate understanding of the length and depth of business-cycle fluctuations is therefore an important element in successful planning of firms’ investments as well as in forming the appropriate strategies. During the last fifty years there have been a decline in frequency and depth of recessions in a large majority of countries in what is known as the Great Moderation. However, the Great Recession that began at the end of 2007 brought this pattern to an end. Understanding the causes of the Great Moderation is critical as it helps in understanding the future patterns of the macroeconomic environment.

 

Two important aspects of recessions are tightening of credit conditions and increased unemployment. However, these conditions significantly differed across countries. While in Germany or Denmark the unemployment rate did not increase much, in Spain it has increased from 8% to over 20%.

 

The Great Recession should be seen as a wakeup call for the risks of globalisation. Increased trade volumes that have come with globalisation is the international amplification of downturns in large developed economies such as the U.S., Japan and the EU. Increased financial integration paralysed developing countries from counteracting the global effects of these shocks. As a result, domestic recessions in developed economies contribute with a significant destabilizing force towards developing countries.

 

This new reality was hard to anticipate 10 years ago when the consensus was that openness to international capital was the main destabilizing factor of developing economies. However, China did not experience any currency crisis in the 1990s and became the largest holder of foreign exchange reserves, together with effective capital controls, China maintained an artificially low RMB that helped it grow its export markets. Despite China’s productivity miracle had many factors, one of the most important was the acceleration at which Chinese companies mastered increasingly sophisticated technologies.#p#分頁標題#e#

 

A large academic literature tried to understand the causes of business cycle fluctuations and their effects on the economy. Some of the literature propositions include shocks to government spending, taxes, money supply and demand, input prices such as energy or capital, news about future technology, wage and price mark-ups, volatility and frictions in credit markets.

 

2.1 UNEMPLOYMENT

 

A key aspect of business cycles is the fluctuations in the unemployment rate. The academic literature has studied this in the context of the search and matching models (Mortensen and Pissarides, 1994). These models recognise that it is costly for workers to search for jobs and for companies to post vacancies. In equilibrium, these search and matching frictions generate both unemployed workers and unfilled vacancies. The search and matching models have been used to study how different regulations such as firing costs, hiring cost, minimum wages, and collective bargaining agreements affect the unemployment rate and the average duration of unemployment phases.

 

2.2 BUSINESS CYCLES IN DEVELOPING COUNTRIES

 

In addition to analysing the time variation of fluctuations, the literature also studied the geographical variation in business cycles. In particular, a body of research tried to understand how and why business cycles are different in developed and developing countries. Comin et al. (2009) explore the effect that shocks to developed economies have on developing countries. They found that disturbances that originate in developed economies are a key driver of business cycles in developing countries. This is not only the case because they contract the demand for exports to the developed economies but also because they affect the flow on new technologies to developing countries.

 

2.3 GLOBAL IMBALANCES

 

Though the literature on global imbalances has taken a U.S. theme, global imbalances are as much about Chinese trade surpluses as U.S. trade deficits. Some of the proposed explanations of the global imbalances are:

 

Lack of investment opportunities in developing countries.

 

Savings glut (Rajan, 2006).

 

Increased in U.S. wealth (Backus et al., 2009).

 

Excess consumption by the U.S.

 

Decline (increase) in relative competitiveness of U.S. (Asian countries).

 

Undervaluation of the RMB (Dooley et al., 2003).

 

More efficient financial intermediation by the U.S (Eichengreen, 2004).

 

Asian reserves are a collateral for U.S. FDI in Asia (Dooley et al., 2004).

 

2.4 INFLATION

 #p#分頁標題#e#

Empirical evidence suggests that high inflation is damaging to an economy because of its distortionary effects on investment and savings decisions. High inflation encourages people to spend and discourages saving, thereby reducing the funds available for deployment to the most efficient uses in the economy. So, in the long run, overspending and reduced savings could result in an underperforming economy and ultimately lead to slower economic growth.

 

Perhaps more condemning is that high inflation is often highly variable. Because investment decisions are based on forward-looking expectations of real (inflation-adjusted) interest rates, inflation that is highly variable is damaging as it amplifies uncertainty and ambiguity.

 

2.5 EXCHANGE RATES

 

Businesses that trade internationally, are under the mercy of global exchange rate fluxes. Changes in currency conversion rates can increase or wipe out profit gains. When a firm has profits in millions, this can make a significant impact on profits and losses. For instance, McDonald's saw sales increase in Europe during 2011, but the annual profits went down as a result of a weakness in euro.

 

The rapidly changing exchange rates can have the potential to make businesses reluctant to set firm figures in contracts early before a deal takes place. Therefore, organisations need to embrace and understand the risks of doing business internationally.

 

MICRO-ECONOMIC FORCES 微觀經濟力量 

 

The micro economic forces are best understood by considering Porter’s Five Force model, which consists of: Suppliers Bargaining Power, Buyer Bargaining Power, Threats from New Entrants, Threats from Substitutes, and Degree of Rivalry. For better understanding the author will use the automotive industry in the UK as a base for discussion.

 

2.1 BUYER POWER

 

Main buyers within the automotive manufacturing industry are dealerships. They are highly dependent on manufacturers which undermines their buyer power.

 

There is a large number of buyers within the automotive manufacturing industry which, along a relatively high level of product differentiation, weakening the buyer power. Dealers are forced to sell car models of preference to customers, which also tends to reduce their buyer power further. Overall, buyer power is relatively weak in this industry.

 

2.2 SUPPLIER POWER

 

Key raw materials needed by automotive manufacturers are commodity items, such as metals. Which are usually manufactured by other firms. With the fairly low differentiation in raw materials, causing less differentiation on the supplied side, subsequently reducing supplier power. However, the critical importance of quality raw materials and components to automotive manufacturers (especially safety-wise) can enhance supplier power.#p#分頁標題#e#

 

Taking a macro perspective, there has been fluctuation in the prices of primary raw materials, which places pressure on manufacturers' margins.

 

Typical suppliers are more likely to sell to a variety of different sectors, with the automotive industry being forming a small part of their customer base. Which strengthens the position of suppliers.

 

Overall, supplier power is moderate

 

2.3 NEW ENTRANTS

 

In markets where there is little protection or barriers to entry from government regulations, customers having little brand loyalty, start-up costs are low, products in the existing market are not unique, production process is simple and access to inputs are relatively easy, risks of new entrants are significantly higher.

 

Putting this into context, the automotive manufacturing industry in the UK has a low new entrants threat level. For new entrants, setting up a production facility is an endeavour that involves the need of large start-up capital thus forming a strong entry barrier enhanced with the high fixed cost too. Which is further amplified with the existing car manufacturers who command strong brand equity and the tighter emission regulations.

 

Taking a macro perspective, the global economic downturn has had a negative impact on car sales as consumers have avoided making expensive purchases. This has resulted in a fall in demand, which reduces the likelihood of new entrants. This shows the importance of considering the macro as well as the micro factors in the approach to corporate management.

 

Overall, the threat of new entrants is assessed as weak.