dissertation題目：Optic fibre data transmission
dissertation語言：英語dissertation English
dissertation專業：計算機網絡
字數：2800
學校國家：英國
是否有數據處理要求：否
您的學校：University of Kent 英國排名39，世界排名500，屬于英國中上等的學校
dissertation用于：Master assignment 碩士課程essay
補充要求和說明：請千萬不要超過3000字

Assignmentessay安排

Write a report, on "Optic fibre data transmission."   Your report should include details of the following topics:寫一份報告，主題是對“光纖數據傳輸。”你的報告應該包括以下主題：

• The structure of an optic fibre and the mechanism used to carry the optical signal within the fibre, using mono-mode and multi-mode transmission methods.一根光纖的結構和機制，用于進行在光纖內的光信號，使用單模式和多模式的傳輸方法。
• Wave division multiplexing.波分復用。
The report should not exceed 3000 words (about five or six sides of A4 paper). It should be in either: MS Word or Openoffice format and submitted via moodle below. The deadline for submission is: by the time 23:55 on Friday Week 9 (26 Nov 2010).該報告應不超過3000字（五六個左右兩側的A4紙）。它應該是在任：MS Word或OpenOffice格式，并提交以下通過Moodle的。截止日期為：第9周（26月11日2010）上周五的時候，23時55分。
 

Marking注意
 

This assessment contributes 10% towards the total mark for this module.這項評估有助于實現此模塊的總分的10％。

Questions?問題
 

Please direct any questions about this assessment to the lecturer: (http://ukthesis.org/jsjwl).請直接咨詢的評估講師任何疑問

Notes注意

You should research papers in journals, books and/or on the Internet and should cite a small number of sources (at least three). These may be books, journal papers, conference papers, papers found on the Web or Internet documents.#p#分頁標題#e#
你可以從研究dissertation的期刊，書籍和/或在互聯網上，應該舉一個小的數源（至少三個）。這些可能是圖書，期刊dissertation，會議dissertation，dissertation發現網絡或互聯網文件。
Full references should be given for each citation to enable the reader to find the information source easily. An example of a reference for a journal paper is given at [1] below. The full URL must be given for sources that can only be found on the Web. Relevant figures may be included, preferably your own; if figures are not your own, you should cite the source in the figure caption. e.g. Fig. x. Classification of some networking techniques (from Veeraraghavan et. al. [1]). (Note that this is acceptable for the purposes of this report, but for papers for publication, agreement must be obtained from the copyright holder for the reproduction of figures.)全部引用應該給每個引用，使讀者能夠輕松地找到所需的信息源。日記帳紙的引用，例如，在下面的[1]給出。必須給出完整的URL來源，只能在網絡上發現的。可能包含有關數字，最好是你自己的，如果數字是不是你自己的，你應該舉源圖中的標題。例如圖x的一些網絡技術的分類（從Veeraraghavan等人[1]）。 （請注意，本報告的目的，這是可以接受的，但dissertation出版的，協議必須獲得版權持有人的數字再現。）
這項工作將標記上的信息已發現和吸收從文獻和您的報告應在知情和可讀的方式。
重要注意事項。它重要的是要記住學術誠信，介紹他人的工作時，我們建議您閱讀章節抄襲碩士課程信息圖書。#p#分頁標題#e#該報告應該是你自己的話。你不能剪切和粘貼文本從源或任何其他文件。短報價（2或3個句子）可以使用，但它們必須被證明是報價單（如引號封閉）和內文源引。例如：
The work will be marked on the way in which information has been found and absorbed from the literature and your report should be presented in an informed and readable fashion.
Important note. It is important to bear in mind academic honesty when presenting the work of others and you are advised to read the section on Plagiarism in the MSc Course Information Book. The report should be in your own words. You must not cut and paste text from your sources or any other documents. Short quotations (up to 2 or 3 sentences) can be used but they must be shown to be quotations (e.g. by enclosing in quotation marks) and the source cited within the text. For example:早期的電話系統并沒有自動交流，因為他們今天所做的切換，而不是電話運營商進行。 Tanenbaum此過程描述如下：“早在天的電話，該連接是通過跳線電纜插頭操作到輸入和輸出插座”[2]。
Early telephone systems did not have automatic exchanges as they do today; the switching was instead performed by the telephone operator. This procedure is described by Tanenbaum as follows: “In the early days of the telephone, the connection was made by having the operator plug a jumper cable into the input and output sockets” [2].

References參考文獻
 

[1]      M. Veeraraghavan, M. Karol, R. Karri, R. Grobbler, T. Moors, “Architecture and Protocols that enable new applications on optical networks”, IEEE Communications Magazine, March 2001, vol 39 no 3, pp 118-127.
[2]      A. S. Tanenbaum, Computer Networks, p.130, 3rd Edition, Prentice Hall, 1996.